ARMA Cooling Guide (Rory Jones)Member Price: Free Non-Member Price AUD$30 (plus tax if applies) In rotational moulding, controlling the cooling cycle is one of the most effective ways of improving part quality and shortening cycle time. This guide covers common methods of cooling, discussion on warpage, part surface variations, wall thickness variations, the mechanics of cooling, air, water & vapor cooling techniques. |
ARMA Machine Guarding Guide (Ian Hansen)Member Price: Free Non-Member Price AUD$30 (plus tax if applies) There are many different types of machinery in rotational moulding, all requiring careful thought about managing the hazards and safety issues through appropriate risk management. Machine guarding can be both a legislative requirement and a necessity to protect the welfare of your staff. This guide covers a range of different types of guarding to help you with regulators to find the best and most logical solution for your plant. |
ARMA Materials Testing Guide (Association of Rotational Moulders Australasia)Member Price: Free Non-Member Price AUD$30 (plus tax if applies) This guide provides moulders with a general overview and increased awareness of the common test standards and procedures used by material suppliers within the industry to assist moulders to perform their own tests in the plant.
|
